Application
MPRXCX® type is used on board of ships at all levels and open decks for installations complying with IEC standards 60092-352.
The good screening qualities of the braid also reduce radio interference and electrical influences to electronic installations.
MPRXCX® type withstands the IEC 60332-3-22 fire test on bunched cables and performs to the SOLAS requirements.
Design
All materials used to produce this cable are halogen free. This design ensures that non corrosive and low toxic gases are emitted in case of fire. Therefore, this cable type is especially designed for installations on passenger ships.
- Conductor:
Bare copper class 2
Sector-shapped for 3 cores
for cross section> 70 mm²
- Insulation:
XLPE (cross linked polyethylene)
- Inner covering:
(Filler if necessary)
Lapped
- Armouring:
Bare copper braid
- Outer sheath:
Polyolefin SHF1
Colour: black
SHF2 on request
Type Approval Certificates
American Bureau of Shipping
Bureau Veritas
China Classification Society
Det Norske Veritas
Germanischer Lloyd
Lloyd's Register of Shipping
Registro Italiano navale
|
