О компании
Продукция и решения
Обслуживание
Работа в Nexans
Новости и пресса
Appliance Wiring Material UL 758 standard certified 1000 V – 90°C Style 3850 for single cores & Style 4558 for multi-cores UL/CSA 22.2 AWM class I, II, or I / II , Group A,B, or A/B
This cable is specially designed for Wind Turbines
The quality of material used for insulation and sheathing and high quality copper conductors make the cables both flexible, durable, resistant to torsion and to high temperatures. Nexans offers more than a decade of experience in the wind energy market. Our expertise makes WINDLINK® cables highly recommended for wind turbines.
1. Conductor : Annealed plain copper- Optional tape Flexible (fine wire class 5 of IEC/EN 60228)
2. Insulation : Special thermoset EPR for high temperature Optional tape on insulation or assembling
3. Sheath: High mechanical performance , oil resistant Ozone resistant, ref HD 22.1, black colour Special thermoset CPE improved for low temperature behaviour (-40°C)
Mechanical stress :
(on the whole cable, per mm² of a cross section of plain copper core)
Bending Radius
Mobile use = 6 x External diameter. Static use = 3 x External diameter , if the external diameter < 12mm, 4 x if the external diameter >12 mm.
Permissible current rating:
Correction factors according for other ambient temperature : according to IEC 60364.5.523 table 52.D1 or DIN VDE 0298-4 Table 15
The Voltage drop has been determined with Cos φ= 0.8
Short circuit : constant K=139 Amps for 1 second, acc.to IEC 60949 ( short circuit temperature +250°C and conductor temperature +90°C)
WINDLINK® NEXANS 213 Nb cores X (or G) S X = without G/Y G = with G/Y S = cross section (mm2) + "UL/CSA" marking Week + year manufacturing meter marking
• 1 core = Black (preferential) • 2 cores = Brown + Blue • 3 cores = Green/Yellow +Blue + Brown (G) Brown + Black + Grey (X S>4mm²) Blue + Brown + Black (X S 1.5 & 2.5 mm²) • 4 cores = Green/Yellow + Brown + Black + Grey (G) Blue + Brown + Black + Grey (X S 1.5 & 2.5 mm²)
