Electrostatic filter cable 111 kV
Single core XLPE insulated cable for filter applications, no-load voltage up to 111 kV DC
StandardsInternational : Manufacturer specification
ELCUFILT 111 kV power cables can be used for dust seperation and cleaning air or gases in industrial plants. For example: flue-gas in power plants, air cleaning in cement plants or gas cleaning in chemical and metallurgical plants.
To insure a proper protection of ELCUFILT 111 kV cable in filter systems from high frequency overvoltages an attenuation resistor should be installed directly at the sealing end, and if necessary at the filter.
Nexans electrostatic filter cables (ELCUFILT 111 kV) are used in electrical filter systems with no-load voltage up to 111 kV according to DIN VDE 0271. The cable consist of a single stranded core aluminium conductor, semi conducting conductor screen, insulation of cross-linked polyethylene (XLPE), semi conducting insulation screen, copper screen, separator and a PVC sheath.
For further more information fell free to contact our technical specialists or commercial departments.
|Diameter over insulation||28.5mm|
|Max. DC resistance of the conductor at 20°C||0.641Ohm/km|
|Resistance of the screen||1.83Ohm/km|
|Maximum pulling force by laying||1.5kN|
|Bending factor when installed||17(xD)|
|Bending factor when laying||23(xD)|
|Maximum operating temperature||90°C|