Electrostatic filter cable 111 kV

Описание
Single core XLPE insulated cable for filter applications, no-load voltage up to 111 kV DC
Описание
Стандарты
Международные : Manufacturer specificationОписание
ELCUFILT 111 kV power cables can be used for dust seperation and cleaning air or gases in industrial plants. For example: flue-gas in power plants, air cleaning in cement plants or gas cleaning in chemical and metallurgical plants.
To insure a proper protection of ELCUFILT 111 kV cable in filter systems from high frequency overvoltages an attenuation resistor should be installed directly at the sealing end, and if necessary at the filter.
Nexans electrostatic filter cables (ELCUFILT 111 kV) are used in electrical filter systems with no-load voltage up to 111 kV according to DIN VDE 0271. The cable consist of a single stranded core aluminium conductor, semi conducting conductor screen, insulation of cross-linked polyethylene (XLPE), semi conducting insulation screen, copper screen, separator and a PVC sheath.
For further more information fell free to contact our technical specialists or commercial departments.
Характеристики
Конструктивные характеристики | |
---|---|
Материал жилы | Алюминий |
Материал изоляции | XLPE |
Экран | Медные проволоки |
Внешняя оболочка | Поливинилхлорид (PVC) |
Не содержит свинца | Да |
Геометрические характеристики | |
Диаметр проводника | 8,2мм |
Диаметр по изоляции | 28,5мм |
Электрические характеристики | |
Рабочее напряжение | 111кВ |
Максимальное сопротивление жилы постоянному току при 20°С | 0,641Ом/км |
Resistance of the screen | 1,83Ом/км |
Взаимная емкость | 130nF/km |
Волновое сопротивление | 45Ohm |
Механические характеристики | |
Максимальное тяговое усилие при прокладке | 1,5кН |
Условия применения | |
Минимальный радиус изгиба в статическом состоянии | 17(xD) |
Минимальный радиус изгиба при прокладке | 23(xD) |
Maximum operating temperature | 90°C |