PAS 5308 Part 1/Type 1 Hypron® OS Fire retardant

Описание
- Instrumentation cables 300/500 V
- XLPE insulation (Part 1)
- Unarmoured (Type 1)
- Overall Screen (OS)
- Lead free
- Aliphatic and aromatic hydrocarbons resistant
Описание
- XLPE insulation (Part 1)
- Unarmoured (Type 1)
- Overall Screen (OS)
- Lead free
- Aliphatic and aromatic hydrocarbons resistant
Стандарты
Международные : IEC 60332-3-22 Cat.AОписание
Applications
These instrumentation and communication cable are used to transmit analogue or digital signals in measurement and process control in moist areas and where aliphatic and aromatic hydrocarbons may be present. Hypron® offers an alternative to conventional lead covered cable and is an environmental friendly solution..
Design
Conductor:
Solid, stranded or flexible bare copper
Insulation:
Cross-linked polyethylene (XLPE)
Binder tape
Bedding
Inner sheath:
Polyvinyl chloride (PVC)
Colour: black.
Overall screen/sealing barrier:
Tinned copper drain wire
Aluminium/polyethylene tape
Bedding:
High density polyethylene (PE)
Colour: black
Special sheath (intermediate sheath):
Polyamide
Outer sheath:
Polyvinyl chloride (PVC)
Colour: black
Other colour on request.
Core identification
Pair: black - white
Quad: black - white - red - blue (2 pair cables are assembled as a quad)
White core printed with pair number
On request: according to PAS 5308 part 1
Marking
NEXANS 279 XLPE/PVC/AL/HDPE/NC/PVC 300/500V Nber of pairs & cross-section Cu IEC 60332-3-22(A) MM YYYY Manufacturing number + metric marking
Standards
PAS 5308 Part 1/type 1 (Design guide-lines)
BS EN 60228-2005
BS EN 50290-2-29
Характеристики
Конструктивные характеристики | |
---|---|
Материал жилы | Bare copper |
Insulation | XLPE (Cross-linked Polyethylene) |
Inner sheath | PVC |
Overall screen | Tinned copper drain wire + aluminium/polyethylene tape |
Материал подушки под броню | High-density polyethylene (PE) |
Intermediate sheath | Polyamide |
Внешняя оболочка | Поливинилхлорид (PVC) |
Не содержит свинца | Да |
Protection | no |
Электрические характеристики | |
Номинальное напряжение Uo/U (Um) | 300 / 500 V |
Условия применения | |
Fire retardant | IEC 60332-3-22 |
Химическая стойкость | Aliphatic and aromatic hydrocarbons resistant |
Защита от электромагнитных наводок | Yes |
Температурный диапазон при эксплуатации | -20 .. 60°C |
Максимальная температура жилы в эксплуатации | 90°C |
Standard | PAS |
Specific characteristics | |
See all products | |
|
Продукты и услуги
Связанная информация
Related documents
Selling information
Other fire performances IEC 60332-1 or IEC 60332-3-24(C) on request.
Minimum bending radius:
15 x outer diameter
To be doubled during laying operations
Tinned copper conductors available on request