Описание
- XLPE insulation (Part 1)
- Armoured (Type 2)
- Individual & Overall Screen (IOS)
- Lead free
- Aliphatic and aromatic hydrocarbons resistant
Стандарты
Международные : IEC 60332-3-22 Cat.AОписание
Applications
These instrumentation and communication cable are used to transmit analogue or digital signals in measurement and process control in moist areas and where aliphatic and aromatic hydrocarbons may be present. They are well adapted to underground use in industrial applications where chemical and mechanical protections are needed (refinery areas, chemical plant...). The individual screening of each pair limits the consequence of crosstalk. Hypron® offers an alternative to conventional lead sheathed cable and is an environmental friendly solution.
Design
Conductor:
Solid, stranded or flexible bare copper
Insulation:
Cross-linked polyethylene (XLPE)
Individual screen:
Binder tape
Tinned copper drain wire
Aluminium/polyester tape
Binder tape
Binder tape:
Bedding:
Inner sheath:
Polyvinyl chloride (PVC)
Colour: black.
Overall screen/sealing barrier:
Tinned copper drain wire
Aluminium/polyethylene tape
Bedding:
High density polyethylene (PE)
Colour: black
Special sheath (intermediate sheath):
Polyamide
Armour:
Galvanized steel wires (SWA)
Outer sheath:
Polyvinyl chloride (PVC)
Colour: black
Other colour on request.
Core identification
Pair: black - white
White core printed with pair number
On request: according to PAS 5308 part 1
Marking
NEXANS 279 XLPE/IND.SCR/AL/HDPE/NC/SWA/PVC 300/500V Nber of pairs & cross-section Cu IEC 60332-3-22(A) MM YYYY Manufacturing number + metric marking
Standards
PAS 5308 Part 1/type 2 (Design guide-lines)
BS EN 60228-2005
BS EN 50290-2-29
Характеристики
Конструктивные характеристики | |
---|---|
Материал жилы | Bare copper |
Тип жилы | Circula, Flexible, Class 5 |
Insulation | XLPE (Cross-linked Polyethylene) |
Individual screen | Tinned copper drain wire + aluminium/polyester tape |
Inner sheath | PVC |
Overall screen | Tinned copper drain wire + aluminium/polyethylene tape |
Материал подушки под броню | High-density polyethylene (PE) |
Тип брони | Оцинкованные стальные проволоки |
Внешняя оболочка | Поливинилхлорид (PVC) |
Не содержит свинца | Да |
Protection | Yes |
Геометрические характеристики | |
Сечение жилы | 0,5мм² |
Number of pairs | 5 |
Диаметр проводника | 0,9мм |
Диаметр по изоляции | 2,1мм |
Диаметр по внутренней оболочке | 13,7мм |
Диаметр по промежуточной оболочке | 17,1мм |
Диаметр по броне | 19,6мм |
Минимальный наружный диаметр | 24,8мм |
Максимальный наружный диаметр | 27,4мм |
Приблизительный вес (кг/км) | 972kg/km |
Электрические характеристики | |
Номинальное напряжение Uo/U (Um) | 300 / 500 V |
Механические характеристики | |
Mechanical resistance to impacts | Good |
Условия применения | |
Fire retardant | IEC 60332-3-22 |
Химическая стойкость | Aliphatic and aromatic hydrocarbons resistant |
Защита от электромагнитных наводок | Yes |
Температурный диапазон при эксплуатации | -20 .. 60°C |
Максимальная температура жилы в эксплуатации | 90°C |
Standard | PAS |
Связанная информация
Related documents
Selling information
Other fire performances IEC 60332-1 or IEC 60332-3-24(C) on request.
Minimum bending radius:
15 x outer diameter
To be doubled during laying operations
Tinned copper conductors available on request